More Specification

1. • RBS blower stage: with gas tight sealing of the driving shaft.
It is available, optionally, the blower with a special anticorrosion coating protecting all the blower’s components in contact with the gas.
The blower is explosion-proof tested and certified up to 12 bar.

2. • Suction silencer: 1.2 bar overpressure PED certificated special design silencer, fabricated in hot galvanized steel with drainage and 12 bar explosion-proof tested. It is also available in the stainless steel
version as optional.

3. • Baseframe with discharge silencer: 1.3 bar overpressure PEDcertificated baseplate and special design discharge silencer, fabricated in hot galvanized steel with drainage device and 12 bar explosion-proof tested. It is also available in the stainless steel version as optional.

4. • Spark safe belt guard in ATESX version.

5. • Instruments panel:
• Inlet and outlet pressure gauge indicators: diaphragm manometer complete of stainless steel accessories (tap and pipes) in ATEX version.
• Temperature protection switch in ATEX version
• Pressure protection switches (optional)

6. • Pressure regulator with bypass for keeping outlet pressure constant(optional). The standard version is equipped with a safety relief valve and a non return WR valve in ATEX version.

Axial compensators in suction and discharge side in stainless steel.

• The following components are available in addition to the standard version:
– Sound enclosure
– Stainless steel gas humidity drainage system with tank

Other special designs are available upon request.