Centrifugal Process Pump RKC Series

In this type of pumps, the pumping effect is obtained by exploiting the action of the vortex induced into the liquid by a special impeller. Thanks to the shape of the impeller and to its recessed position in the casing, the pumped liquid does not have to flow through any vane passages. It is therefore possible to pump viscous and/or pasty liquids containing foreign bodies of remarkable size and stringy matter without the danger of clogging the pump. Moreover the action of the induced vortex enables the conveyance of media containing high percentage of air and/or entrained gas without showing those problems of the conventional centrifugal pump. The type of construction derives from the RN pumps line with consequent advantages of an easy maintenance and easy impeller replacement to possibly suit the pump to the varied conditions of service.

The pumps of RKC line are suitable for industries such as paper, sugar, food, mining, steel, chemical and sewage treatment systems.

Details/Data Download

 

More Specification

MATERIALS OF CONSTRUCTION
The liquid end can be in cast iron (nodular iron impeller), in cast steel FEG 45VR, in stainless steel AISI 304, in stainless steel AISI 316 and in special alloys with hardness up to 500 HB. The shaft and the sleeve of the standard construction are in stainless steel X30Cr13. The sleeve can be hardened or ceramic coated (hardness 63 HRc). The bearing bracket is always in cast iron.

APPLICATIONS

Paper industry
To convey paper stock up to 8% concertration and with a remarkable homogeneization effect of the fibres.
Waste waters.

Sugar industry
To handle water with pieces of sugar beets in suspension
Sugar juices containing crystals which shall not be broken
Waste waters with suspended solids.

Food industry
To handle liquids with vegetables in suspension
Recovery drity water.

Mining, steel and chemical industry
To convey liquids containing crystals, muddy waters

Sewage treatment systems
Raw sludge, clouded sewage water.